Chapter 2 · IoT & DevicesNew

Sensors, scales and label printers in one system

Flowersynk reads the climate and substrate values of your sensor systems, takes the weight from KERN scales straight into the task and prints labels on Zebra printers – from every device, the iPhone included.

Integrations page with the connected sensor sources, their status and the latest values
Printing a label from the phone

At a glance

  • 10 sensor sources

    Growlink, GrowControl, Bluelab, Ecowitt, Aranet, Mobile Alerts and more.

  • CarbonActive

    IGC and ERG ventilation: readings in, recipe setpoints out.

  • KERN scales

    Live weight in the weigh-in step of the task.

  • Zebra printers

    Labels printed from the phone via the Flowersynk Edge.

01Sensor integrations

Connect your sensor systems with their API key

Connect the cloud account of your sensor or climate system with its API key: Growlink, GrowControl, Bluelab, Ecowitt, Aranet, Mobile Alerts, SensorPush, Pulse Grow, METER ZENTRA and Tuya. LoRaWAN sensors report through The Things Stack, your own gateways through the IoT API.

Flowersynk finds the channels of every device and proposes the quantity, the unit and the sensor. You assign them to a room once – from then on the values arrive automatically, and where the system keeps a history, past days are loaded as well.

  • Third-party systems currently read only: no device is switched, no setpoint changed – sending setpoints to Growlink is in preparation
  • History of up to 7 days (Growlink), 90 days (Ecowitt) or 180 days (Aranet)
  • Units converted, e.g. °F to °C and gallons to litres
  • Decimal place corrections suggested for implausible values
Sensor sources on the phone with status and latest values

02Room climate

Several sensors per room, one clear value

When several sensors of a room measure the same quantity – an Ecowitt channel and a climate controller, for example – you choose per quantity: the lead sensor counts, or the average of all current values.

The values feed everything that uses room data: the targets of the grow phase, the alarms, the climate lanes on the batch timeline, the environment evidence of an OOS investigation and the climate chapter of the Cannabis Pass.

  • Lead sensor or average per quantity
  • VPD calculated from temperature and humidity
  • Alarms acknowledged with a note for the shift handover
  • Setpoints of the controllers next to the readings
Room climate card with several sensors, the lead sensor marked and live values

03Status and alerts

You know at once when a source goes quiet

Every integration shows its status: connected, delayed, interrupted or sign-in refused. If no value arrives for 30 minutes, the responsible people are notified – and again as soon as the source is back online.

Battery and radio signal of the sensors are watched as well, where the system reports them: below 20 % the sensor shows "Battery low" and a notice goes out.

  • Outage notice after 30 minutes, notice when back online
  • Retries at growing intervals, no lockout of your vendor account
  • Battery and signal per sensor
  • API keys stored encrypted, shown only as •••• 4f2a
  • Sensors that disappear are kept with "not seen since"
  • Every reading keeps its origin

04Scales

The weight goes straight from the scale into the task

KERN scales send their reading live into the weigh-in and waste steps of a task: KERN KUP-05 (WiFi) and KUP-04 (Ethernet) in the network, RS-232 or USB through the Flowersynk Edge, or straight in the browser via Web Serial and Web Bluetooth.

Flowersynk takes over a stable reading only and records how the weight arrived. A scale whose calibration is overdue cannot be used – calibration tasks keep its due date up to date.

  • Live weight on every device, iPad and iPhone included
  • Stable and unstable readings told apart
  • Calibration check before every capture
  • Further scales through a configurable data format
Weigh-in step of a task with the live weight of a KERN scale
Weigh-in step on the phone with the weight taken over from the scale

05Label printers

Print labels from your phone – on Zebra printers

Flowersynk renders every label as ZPL for your Zebra printer, at 203, 300 or 600 dpi and in your label size. The job goes through the print queue to the Flowersynk Edge in your network – so you print from every device, the iPhone included, with nothing to install.

Plant batches, product batches, goods-in units, cartons, samples, parcels, sticky traps, areas and equipment: every label carries a QR code that opens its record. The EU plant passport is printed as a label of its own.

  • Status per job: printed or failed, with "Print again"
  • While the Edge is offline, jobs wait and print once it is back
  • Every print recorded in the audit trail
  • Labels carry only data that never changes
Label preview with QR code, printed on a Zebra printer
Printing a label from the phone

06Flowersynk Edge

One small box connects scale and printer

The Flowersynk Edge is a Raspberry Pi in your network, next to the label printer and the scale. It connects outbound to Flowersynk – no port forwarding, behind NAT as well.

Installed with one command, the box shows a QR code: scan it with your phone and confirm with your passkey – within seconds it is online. Flowersynk shows its status at all times.

  • Outbound connection only, no open port
  • Pairing by QR code
  • Heartbeat every 30 seconds: "Online" or "Edge offline"
  • Reaches only allowed printer and scale addresses
  • Automatic security updates on the box
  • Network printers and USB printers at the box

07Recommended hardware

Hardware that works with Flowersynk

Our recommendations for room technology and sensors. Flowersynk reads the values of the CarbonActive IGC and ERG ventilation units and hands them the setpoints of the grow recipe through the HMI interface; the integrated sensor systems deliver their values read only from their cloud – no extra hardware needed.

Using another system? Connect LoRaWAN sensors through The Things Stack and your own gateways through the IoT API – and talk to us about further connections.

  • CarbonActive IGC and ERG: readings and recipe setpoints through the HMI interface
  • Third-party systems currently read only; sending the grow recipe's setpoints to Growlink is in preparation
  • API keys stored encrypted
  • Several systems in one room
CarbonActive Indoor Growing Compartment (IGC), 3D model
CarbonActive IGC – drag to rotate
  • CarbonActiveThe company behind Flowersynk

    Swiss family business from Steinhausen (ZG), in indoor climate since 2004: air handling units that filter, dehumidify, cool and heat, activated carbon and particle filters, EC fans, complete grow rooms with 35 m² growing area (Indoor Growing Compartment, IGC), the ERG ventilation system that uses waste heat to cool, heat and dehumidify an existing room, control cabinets with control software, irrigation and engineering for medical cultivation and research. Flowersynk reads the values of the IGC and ERG ventilation units and hands them the setpoints of the grow recipe through the HMI interface, together with the dosing recipe of the mixing tanks. Flowersynk was founded by CarbonActive Services AG.

    • HMI interface
    • Air handling
    • Filters
    • Grow rooms
    • Control software
    • Engineering
    carbonactive.ch
  • GrowlinkIntegrated · history 7 days

    Through the Growlink Developer API: rooms, sensors and live values – temperature, humidity, VPD, CO₂, pH, EC, water content, PPFD, dissolved oxygen, ORP and air pressure. Climate setpoints and lamp dimming are shown today; sending the grow recipe's setpoints to Growlink is in preparation.

    • Live values
    • History 7 days
    • Setpoints
    • Sending setpoints: in preparation
  • GrowControlIntegrated

    GrowBase climate controllers and the Industrial series through the GrowControl customer API with a read token: temperature, humidity, VPD and CO₂ plus the temperature and humidity setpoints – one set of values per zone.

    • Live values every minute
    • Setpoints
    • Zones
  • EcowittIntegrated · history 90 days

    Gateways and their channel sensors through the Ecowitt cloud API: temperature and humidity (indoor and up to 8 channels), soil moisture (up to 16 channels), soil moisture with EC, and CO₂.

    • Live values
    • History 90 days
  • AranetIntegrated · history 180 days

    Sensors on Aranet PRO base stations through Aranet Cloud: temperature, humidity, CO₂, air pressure, PAR as PPFD and substrate values – water content, bulk EC, pore-water EC and temperature. Battery and radio signal of every sensor included.

    • Live values
    • History 180 days
    • Battery & signal
  • Mobile AlertsIntegrated

    The radio sensors of the Mobile Alerts system by Technoline: thermometers and thermo-hygrometers (also with cable probe), air pressure and CO₂ sensors. Current values every five minutes, with a low-battery warning.

    • Live values
    • Battery warning
  • BluelabIntegrated · history 7 days

    Through Bluelab's Edenic API: Guardian monitors with pH, EC and temperature of the nutrient solution, assigned per tank or room. Current values at most once a minute per device, up to 7 days of history on connect. The device's pH alarm limits appear next to the grow recipe's targets. Read only.

    • pH · EC · temperature
    • History 7 days
    • Alarm limits
  • SensorPushIntegrated · history 30 days

    Bluetooth sensors reporting through the SensorPush gateway: temperature, humidity and VPD, on the pressure models also air pressure – read from the SensorPush cloud.

    • Live values
    • History 30 days
    • Temperature · humidity · VPD
  • Pulse GrowIntegrated

    Pulse One and Pulse Pro climate sensors and the sensors on a Pulse Hub – climate, CO₂, light, substrate moisture and EC, solution EC and pH.

    • Live values
    • Climate and substrate
    • History 1 day
  • METER ZENTRAIntegrated · history up to 914 days

    ZENTRA Cloud loggers with TEROS substrate sensors (water content, EC, temperature), ATMOS climate sensors and PAR sensors.

    • Substrate (TEROS)
    • Climate (ATMOS)
    • History up to 914 days
  • TuyaIntegrated

    Sensors of your own Tuya cloud project – temperature, humidity, CO₂ and other numeric values. Flowersynk only reads; it never switches a device.

    • Live values
    • Read only

Real screens of the Flowersynk app with demo data.

See it with your own data

Book a walkthrough: we show you Flowersynk with the processes of your site – from goods-in to batch release.