Chapter 1 · Cultivation
From the first cutting to the harvest
Plant batches, master recipes, tasks, scouting and room data work together: you plan once, Flowersynk schedules the work, and every step lands in the batch record.


At a glance
Origin first
Every batch starts from seeds, a plant lot or a mother plant.
Planned vs. actual
Phases, targets and delays visible on every batch.
Recipe-driven
Master recipes create tasks and room targets automatically.
Room data
Climate and substrate values against the phase targets.
01Plant batches
Plant batches from origin to harvest
Every new batch starts from its origin – seeds, a plant lot or a mother plant – and gets a batch number following your scheme. Stock is booked automatically, and traceability works in both directions.
The overview shows the phases, a "Now" card with the targets of the current phase and the latest EC and pH values, plus effort, costs and yield per m².
- Harvest with wet and dry weight as a weighing series
- Destruction of all or part of a batch with a record – in GMP mode with four-eyes approval
- Corrections with a reason; changed values stay visible


02Schedule
The batch list is your schedule
Every row expands into the complete timeline with phases, rooms, events and tasks. Zoom smoothly with two fingers, the slider or the keyboard – "Fit" shows all listed batches.
On the phone the same list becomes cards with search and filters, so the team finds its batch in seconds.
- Measurement round: record values for many batches in one go
- Delays and phase status visible at first sight


03Actual vs. target
Targets of the current phase, right on the batch
The batch shows the targets of its room and phase next to the latest measured values – climate from the room sensors, EC and pH from irrigation. Expected harvest date and expected yield follow from the recipe and the batch age.
Your team sees immediately whether a batch is on track – and where it needs attention.
- Phases with planned and actual days
- Effort per work step from the finished tasks

04Climate and room data
Climate and room monitoring against the targets
Sensors send their readings through the Flowersynk device and IoT API. Each room shows air temperature, humidity, VPD, CO₂ and substrate values live against the targets of the current grow phase – with gauges, time in range and history from one hour to 30 days.
The same room data appears on the plant batch: as lanes on the timeline and next to the targets of the phase, so climate and plant development are seen together.
- Targets per phase from the master recipe or the monitoring targets
- Values out of range are flagged and notify the team
- Climate lanes on the expanded batch timeline
- Sensor integrations such as Growlink, GrowControl and Ecowitt, or the IoT API


05Master recipes
Master recipes that plan the work
A master recipe defines phases and sub-phases with durations and targets. New versions are released under the four-eyes principle; running batches keep their released version.
The recipe creates the tasks and room targets of every batch automatically – also for rooting and mother plants.
- Versions with four-eyes release and e-signature
- Default recipe per strain
- Work instructions linked to every phase


06Tasks
Tasks, Kanban board and work instructions
Tasks come from the master recipe or are scheduled by hand. The Kanban board moves them from planned to done and on to sign-off; time estimates per m² or per plant and the required articles sit right on the task.
Work instructions carry steps, preconditions and rules – recurring on fixed weekdays or before and after a room is used.
- Release and acceptance under the four-eyes principle
- Safety notices and GHS hazard labelling in the work step
- Running tasks stay visible at the top of every page


07Work steps
Work steps, safety notices and measurements on the phone
On the phone the task guides through its preconditions and steps: confirm what must be true before starting, enter measurements against their target range and note which device you measured with.
Every finished step is recorded with person and time. If a reviewer rejects the result, the reason appears right on the task and the team corrects it.
- Preconditions with target ranges, e.g. EC and pH
- Quality controls before sign-off
- Consumption of inputs booked from stock


08Scouting
Plant health per room, at a glance
Scouting findings are recorded with photos, severity and treatment. Each room is coloured by its worst open finding, so critical warnings never get lost.
Findings can be placed on zones and grid cells of the room plan – the heatmap shows where to look first.
- Pest insects, fungus, virus and viroid, nutrient issues
- Findings and treatments in the batch history


09Rooms
A room plan as a digital twin
Areas form a hierarchy from site to room, table and zone, set up with a wizard. Each room has its capabilities, capacity hints and your own storage conditions.
The room plan places tables, shelves and zones on a coordinate grid – on screen, as labels and as a printout.
- Processing and storage rooms
- QR labels for areas

10Inputs
Fertilizer and crop protection under control
Inputs such as fertilizer, crop protection and substrates have their stock, usage and the demand of the planned tasks in one list.
Flowersynk forecasts when an input runs out and warns below the minimum stock – the reorder is one tap away.
- Application on the batch, booked from stock
- Quarantine and release at goods-in

11Equipment
Calibration and maintenance on schedule
Equipment has calibration and maintenance plans, a maintenance history and due dates on the home page.
Report a defective device with one click and the repair task is created automatically; in GMP mode the device a value was measured with is recorded.
- Overdue, due and signed-off at a glance
- Records with signature

Real screens of the Flowersynk app with demo data.
See it with your own data
Book a walkthrough: we show you Flowersynk with the processes of your site – from goods-in to batch release.