Chapter 3 · Quality & GMP

Quality you can show to every auditor

Audit trail, e-signatures, four-eyes approvals, lab, OOS, complaints and recalls are part of the daily work in Flowersynk – with GAMP 5-compliant development from January 2027. Every decision is documented with person, time and reason.

OOS case overview with measured value, limit, sample, test order and the phase progress
Mock recall on a phone with reason and key figures

At a glance

  • Tamper-evident

    Every change with person, time and reason.

  • Four-eyes

    Approvals with e-signature in one inbox.

  • Ph. Eur. 5.1.4 · 5.1.8

    Microbiology evaluated with the maximum acceptable count.

  • GAMP 5

    Compliant development from January 2027.

01Audit trail

Every change with person, time and reason

Flowersynk records every change in a tamper-evident audit trail – also deletions and backdated entries. See the history on every record or centrally, with filters and CSV export.

Audit trail reviews are confirmed with an e-signature, so the review itself is documented, too.

  • Filter by person, record type, action and reason
  • Integrity check of the trail
  • Number series with their own scheme per document type
Audit trail filtered to changes with a reason, with person, time, record and GMP markers

02E-signatures

Electronic signatures as binding as a handwritten one

Every e-signature carries the person and their role, date and time and its meaning – for example "approved as head of QA". A checksum binds it to the signed content for good.

Signing asks for the password again, plus a fresh authenticator code where your organization requires it. Signatures can only be added, never changed or deleted – the database refuses it – and Flowersynk shows whether a record changed after it was signed.

  • Reason mandatory for every rejection
  • Audit trail reviews, approvals and calibration records signed in one dialog
  • Built along EU GMP Annex 11 § 14
Electronic signature dialog of a release with meaning and reason
E-signature on the phone

03Four-eyes principle

Four-eyes approvals for every critical step

You decide which steps a second authorized person has to confirm: stock corrections, deletions, releases of master recipes and work instructions, the QA release at goods-in or sending purchase orders.

The requester never approves their own request. Everything waiting for you lands in one "Approvals" inbox, and GMP-relevant approvals are decided with an e-signature. GMP mode switches the strict rules on for the whole organization – switching it off again needs a second admin.

  • Entering data is never blocked – only its effect waits
  • QA release per material category at goods-in
  • Lab result and batch corrections always four-eyes in GMP mode
Approvals inbox with requests waiting for a second person

04GAMP 5

GAMP 5-compliant development from January 2027

From January 2027, Flowersynk is developed under its own procedures according to GAMP 5 and EU GMP Annex 11: a configurable product (GAMP category 4) with a documented lifecycle for requirements, changes, tests, configuration and releases.

Every GMP-relevant function has a stable ID in the function catalogue, and the tests carry the same ID. A traceability matrix leads from your requirements (URS) to the latest test result – a solid basis for the validation of your computerised system.

  • Every change classified by its GMP impact and reviewed by risk
  • Release record with test result, reviews and release notes, released by QA with e-signature
  • Release notes in German and English for every release
  • Supplier description and template quality agreement for your supplier qualification
  • Supplier audits on site or by screen sharing
  • New modules off by default – no unplanned effect on validated processes

05Lab and release

Samples, results and the batch decision

Lab and retention samples, lab orders with a number and results that are evaluated automatically against the specification. Certificates of analysis are archived, never deleted.

Results change only as a documented correction – the original value stays visible. The QC tab of every article batch ends with the decision: release or block.

  • Specifications per market
  • Retention samples with stock and location
  • Release checks before the batch can go out
Quality check tab of an article batch with open OOS case, release button, samples and test overview
Quality check of an article batch on a phone with the release button

06Ph. Eur.

Microbiology evaluated according to Ph. Eur.

Microbiological criteria follow Ph. Eur. 5.1.4 and 5.1.8 with their maximum acceptable count: a result between the criterion and the maximum passes and carries the marker "within Ph. Eur. tolerance".

The evaluation is the same everywhere – on the batch, on the certificate of analysis, in the Cannabis Pass and in the marketplace. QA reviews affected results in one list.

  • "Within Ph. Eur. tolerance" list for QA
  • Spec corrections that need your decision
  • Released and blocked batches stay unchanged
List of results within the Ph. Eur. tolerance with criterion, maximum acceptable count and OOS case

07OOS

OOS investigations with guided phases

An out-of-specification result opens an OOS case that guides through phase Ia, Ib and II with checklists, evidence and participants. Events and tasks of the batch record are linked as evidence.

Retest rules, results and the final decision are documented in one timeline – ready for the next inspection.

  • Four guided exits from the investigation
  • Retest only by rule, correction is not a retest
  • Participants with their role in the investigation
OOS investigation in phase II with checklist, manufacturing finding and evidence
OOS investigation on a phone with phase II checklist

08Recall

Recalls and mock recalls down to every customer

Start a recall from a batch: Flowersynk computes the scope across all derived batches, the delivered and reserved quantities and every customer – and lists the open orders to stop.

A mock recall runs the same way without customer mails and without blocking, and measures the time until all customers are identified.

  • Recall report as PDF
  • Customer notification and status per customer
  • Destruction and returns documented on the recall
Mock recall with reason, customers informed, delivered and in-stock quantities, scope and customers

09Complaints

Complaints as QMS cases on the batch

Complaints are recorded on the affected batch with category, severity and contact. A guided flow leads from review and investigation to closing.

From the complaint you take a retention sample, block the batch, open a deviation or start a recall.

  • Critical categories alert QA at once
  • Timeline with every step
Complaint case with report, batch, guided steps, owner, due date and actions

10Traceability

Traceability as a timeline – and the batch record as PDF

Every article batch shows where it comes from and where it went: plant batch, waste, destruction, harvest, drying, moves and sales in one timeline.

The complete batch record is available as a PDF – with all events, tasks and decisions.

  • Forward and backward traceability
  • Batch record PDF
  • Work instruction reviews on a regular schedule
Traceability timeline of an article batch from the plant batch via waste and harvest
Traceability timeline on a phone

Flowersynk supports your GACP and GMP compliance. Certification and release remain with your organization and your Qualified Person.

Real screens of the Flowersynk app with demo data.

See it with your own data

Book a walkthrough: we show you Flowersynk with the processes of your site – from goods-in to batch release.